Can I use Murphy’s Oil Soap to clean leather?

Commercials for the product state that the product is ideal for cleaning wood surfaces. The other constituents of Murphy Oil Soap are sodium EDTA, propylene glycol, fragrance, surfactants, and water. Murphy Oil Soap is commonly used to clean and polish horse tack, such as bridles and saddles.

Steps for Cleaning

Vacuum clean the sofa with a soft brush attachment.

Create a cleaning solution by mixing equal parts of water and white vinegar.

Dip a soft cloth (preferably a microfiber cloth) in this solution and wring it out so that the cloth is damp, not completely wet.

Instructions

Mix the Murphy’s Oil Soap with water and wash the piece with a rag dampened in the mixture.

If there is still dirt or paint stuck to the piece, rub it gently with very fine #0000 steel wool in the direction of the wood grain.

Spray the orange oil on a dry cloth and rub it over the piece.

Notes.

Directions for use on floors (finished wood, laminate, no-wax and tile): Dilute 1/4 cup Murphy® oil soap in 1 gallon of warm water. For heavy cleaning, dilute 1/2 cup Murphy® oil soap per gallon. Clean with well wrung-out mop, and mop any excess water. No rinsing required.

Using water or harsh cleaners on these floors will warp the wood or cause discoloration. However, there are three highly effective products that will help to sanitize and clean your unfinished wood flooring — mineral spirits, white vinegar and Murphy’s Oil Soap.

CLEANING CAN BE NATURALLY SAFE. Another great response for how to clean laminate wood floors involves a bucket, hot water, a mop, Murphy® Oil Soap or a similar natural cleaner that’s safe to use on laminate. Systematically go over your flooring with the mop, being sure not to leave any water behind.

Wash painted cabinets with warm water and diluted all-purpose cleaner, wood cleaner, or white vinegar. Do not get the wood excessively wet. Rinse the surface with a second cloth and clean water.

Cleaning wood furniture with vinegar and water. In your bucket, mix half a cup of white vinegar to half a gallon of warm water. For larger surfaces, you may want to double it. You can either spray the vinegar mixture on a soft rag or dip the rag into the bucket and then wring it out thoroughly.

An all-purpose cleaner is a cleaning agent, usually a liquid, used to remove dirt, grime, and stains from surfaces. Some all-purpose cleaners require dilution, scrubbing, and rinsing, while others employ a simpler “spray and wipe” process. Oftentimes what you gain in convenience, you lose in cleaning power.

How to Clean: Use warm, soapy water, a mild bleach solution, or a nonabrasive kitchen cleaner to clean laminate countertops. Don’t use abrasive cleaning pads. Use a soft toothbrush along seams or along metal edging. Take care when using bleach solutions: They may alter the countertopcolor or cause other surface damage.

Hard surface cleaners is a category of cleaning agents comprising mainly aqueous solutions of specialty chemicals that vary with the amount of dirt and the surface being cleaned.

Use proper tools to clean your floor – a mop paired with a machine washable, microfiber pad for dusting and cleaning. Electrostatic action attracts dirt, microparticles and common household allergens. Avoid using water and vinegar, soap-based cleaners, wax or steam cleaners on your hardwood floors.

For occasional deep cleaning (dirt, oil and grime will build up over time), the best solution for cleaning wood floors is one cup of vinegar mixed with one gallon of water. Immerse a clean mop into the solution and wring it until it is damp-dry.

Making your cleaners nontoxic allows you to remove the grime that dulls the floor and condition the wood so it retains its luster.

Sweep or dust mop wood floors daily, especially in entryways and other areas prone to heavy traffic.

Combine equal parts white vinegar and vegetable oil in a spray bottle.

It may sound more like a salad dressing than a wood floor cleaner, but this combination of lemon juice, olive oil and hot water promises to clean your floors while leaving a rich sheen behind. To minimize the need for damp mopping, use a dust mop or a dry microfiber pad for routine floor cleaning.

Follow These Steps

Clear the floor. Clear the floor area of any furniture that’s easy to move.

Dry-mop or vacuum floor. This gets rid of all surface dirt and debris.

Mop floor, going with the grain. If your floors are polyurethaned, dampen a mop with water and a few drops of dishwashing liquid.

Buff floor with a cloth.

Dilute ¼ cup of Pine-Sol in 1 gallon of water in a bucket. Mop your wood floor with the solution, being sure not to leave puddles, which can crack and warp wood flooring. Use Pine-Sol straight out of the bottle on stubborn floor stains such as grease.

Cleaning with vinegar and water is cheap, safe for the environment and generally does a great job at cleaning many items in your home. Just don’t use vinegar and water to clean hardwood floors. Using vinegar and water as a homemade hardwood floor cleaning solution can have a negative effect on your hardwood floor.