Can I use my Samsung Smart TV as a computer monitor?

Can I use my TV as a second monitor?

However, if you want to use it as a second monitor for the a computer, you will have to connect it to your computer with a VGA or HDMI cable and use the controls on your computer. I want to give a presentation using my laptop and the TV as my monitor. The TV is new and has not been connected to watch television.

HDMI Port: If your PC has a new high-end graphics card then chances are you have an HDMI port on the back. This is the easiest to use because all you need to do is connect a standard HDMI cable to run the computer to the TV.

However, if you want to use it as a second monitor for the a computer, you will have to connect it to your computer with a VGA or HDMI cable and use the controls on your computer. I want to give a presentation using my laptop and the TV as my monitor. The TV is new and has not been connected to watch television.

Windows- Use your TV as a secondary monitor

Start by connecting the computer and TV with cable.

Then, on your computer, perform the following operations:

Right-click on the desktop.

Select “Display Properties”

Go to “Settings”.

Windows indicated that two screens are connected to your PC.

Click on the screen 2 and check “Extend the desktop onto this monitor”

Connecting a TV as a Second Monitor

Connect the TV monitor cable to the Mac.

Open System Preferences from the Dock and click the Displays button.

Click the Arrangement button.

Drag each screen to create your monitor configuration. Drag the menu bar to the monitor you want the main application windows to open into.

Vice verse, a TV monitor can display content of a TV show after it is turned on. It means that a TV monitor had a built-in receiver set to receive signal from TV cable or Satelline. Acomputer monitor is just an output device. A computer monitor just has some input ports (HDMI,VGA,DVI) to receive outside signal source.

With the monitor not plugged in to power, connect the cable to the appropriate ports on the monitor and the computer. Connect the DC power adapter to the monitor and the power socket. Press the JOG button if necessary to power the monitor on. Press the JOG button on the back of the monitor.

PC Screen Sharing using Intel WiDi

Press the Home button on the remote control.

Find the Device Connector app in the launcher bar by clicking the App List button.

Click OK to launch Device Connector.

Select PC.

Select Screen Share.

Select Intel WiDi.

Click Start.

If you’re looking to connect a computer to a monitor, there’s no reason not to use DisplayPort. The cables are roughly the same price as HDMI. The video signal over DVI is basically the same as HDMI. DVI generally doesn’t do audio (it varies).

Turn the monitor around to the back and look for an “ON/OFF” switch if your monitor won’t turn on. Typically the switch rests near the port for the power cord. Flip the rear switch to the “ON” position and then press the “Power” button again to turn the monitor on.

With the addition of a simple adapter, a DisplayPort cable can connect a DisplayPort source to a VGA display (which is very useful when you need to connect your laptop to an older video projector). Adapters are also available to connect a DisplayPort source to a single-link DVI or HDMI display.

HDMI is really best for connecting a PC to an HDTV. Consequently, I’d go with a DVI cable. That’ll give you a pure digital signal (VGA is analog) and a much sharper picture at higher resolutions. Your Dell ST2210 has a native resolution of 1,920 x 1,080, which you can and should use.

VGA can indeed support 1080p. The quality of the signal begins to drop off above 1920×1080 (1080p) which will cause a drop in image quality due to the analogue nature of the signal but with a good enough cable and transceiver on either end it can be used for resolutions up to and including 2048×1536.

VGA. Assuming you have a port on your TV (it’s usually used for a PC source) you just need a standard VGA cable to connect to your TV. This port does not carry sound so you’ll need a separate cable to carry sound depending on what your PC and TV offer.

DVI and VGA are both incapable of supporting an audio signal, even if they’re converted to HDMI (which does support audio). To get audio, you’ll need to use a separate audio cable.

VGA connector. A Video Graphics Array (VGA) connector is a three-row 15-pin DE-15 connector. The 15-pin VGA connector was provided on many video cards, computer monitors, laptop computers, projectors, and high definition television sets.

HDMI cables can transfer video and audio in high definition quality from one device to another. There are a variety of reasons you may not be hearing source audio on another device when using an HDMI cable; the settings may not be correct on one of the devices, the hardware may be faulty or the cable itself may be bad.

Click OK to close the Sound window.

Enabling the Audio Settings for a TV by activating HDMI sound and adjusting your Windows settings.

Right-click the Volume icon by the time in the lower-right corner.

Click Playback Devices, the Sound window opens.

On the Playback tab, click Digital Output Device (HDMI) if it is listed.

Connect the HDMI cable to your computer and to your output device. After 10 seconds, switch the audio source in the Sound properties. Right-click the Volume icon on the taskbar, and click Playback Devices. On the Playback tab, select the HDMI audio device, click Set Default, then click OK.